400ML AEROSOL PRIMER

[ Ref. 88982 ]

Offers excellent adhesion, moisture resistance and corrosion protection
Easy to apply ensure all surfaces are dry and cleaned first to remove traces of contaminants
30 minute drying time
Suitable for use with both water-based and oil-based topcoats.
Coverage is approximately 8-10 square metres per litre, offering good value

402 PRIMER RED 500ML

[ Ref. AT00PRR500 ]

AUTOTEK ETCH PRIMER 500ML

[ Ref. ATOOOEP500 ]

Adhesion to bare, galvanised and zinc coated steel
Also suitable for applications to aluminium, fully cured paint finishes, GRP and most rigid plastics
Highly flexible and designed to fill slight cracks and indentations
Ideal surface preparation aid

Quick drying
Excellent covering power
Suitable for use on fully cured and aged paint finishes

AUTOTEK FILLER PRIMER 500ML

[ Ref. ATOOOFP500 ]

Provides a tough durable protective coating
High build, non-sag
Excellent adhesion to metals and rigid plastics
Coloured yellow for easy identification
Enhanced covering power

AUTOTEK GUIDE COAT - 500ML

[ Ref. ATOOOGC500 ]

A professional quality guide coat designed to assist in creating a perfectly level surface when sanding
The product is applied as a light mist over filler or primer and dries within minutes
Low spots will be highlighted by the presence of the guide coat during sanding, enabling re-filling and a professional quality repair
Fast Drying

AUTOTEK HIGH BUILD PRIMER GREY - 500ML

[ Ref. ATOHBPG500 ]

A specialist primer with properties for repairs that require thicker coats of primer
Highly flexible and has been designed to fill slight cracks and indentations
Very high build properties enable single coat depths of 100 microns

Excellent adhesion to metals, aged paint finishes and most rigid plastics

AUTOTEK HIGH BUILD PRIMER RED - 500ML

[ Ref. ATOHBPR500 ]

A specialist primer with properties for repairs that require thicker coats of primer
Highly flexible and has been designed to fill slight cracks and indentations
Very high build properties enable single coat depths of 100 microns
Excellent adhesion to metals, aged paint finishes and most rigid plastics

AUTOTEK HIGH BUILD PRIMER WHITE - 500ML

[ Ref. ATOHBPW500 ]

A specialist primer with properties for repairs that require thicker coats of primer
Highly flexible and has been designed to fill slight cracks and indentations
Very high build properties enable single coat depths of 100 microns
Excellent adhesion to metals, aged paint finishes and most rigid plastics

AUTOTEK PANEL PREP DEGREASER - 500ML

[ Ref. ATOOPPD500 ]

A fast acting solvent blend designed for degreasing metal and paintwork prior to coating
For use on any metallic substrate, for the removal of newly deposited, aged or oxidised greases, oils, bitumen and tar stains, waxes, silicones etc
Also suitable for spot removal use on concretes, and on many plastics and painted surfaces subject to successful assessment on an inconspicuous area

AUTOTEK PLASTIC PRIMER GREY 500ML

[ Ref. ATOOPPG500 ]

Promotes optimum adhesion to plastics surfaces
Eliminates the need for specialised pre-treatments
Suitable for use on many rigid plastic surfaces

AUTOTEK PLASTIC PRIMER WHITE 500ML

[ Ref. ATOOPPW500 ]

Promotes optimum adhesion to plastics surfaces
Eliminates the need for specialised pre-treatments
Suitable for use on many rigid plastic surfaces

AUTOTEK PRIMER GREY 500ML

[ Ref. ATOOPRG500 ]

Autotek Primer is a primer that provides a tough and durable finish to all types of paintwork. For best results, leave for 24 hours to ensure the best possible finish can be achieved by the special formula.
The 500ml spray formula also ensures you are able to get a quick and even coverage on the paintwork.
Enhanced covering power
Excellent adhesion to metals and rigid plastics
Suitable for weld-through operations
Compatible with most other paint types

AUTOTEK PRIMER RED 500ML

[ Ref. ATOOPRR500 ]

Enhanced covering power
Excellent adhesion to metals and rigid plastics
Suitable for weld-through operations
Compatible with most other paint types

AUTOTEK PRIMER WHITE 500ML

[ Ref. ATOOPRW500 ]

Enhanced covering power
Excellent adhesion to metals and rigid plastics
Suitable for weld-through operations
Compatible with most other paint types

AUTOTEK ZINC PRIMER 500ML

[ Ref. ATOOOZP500 ]

Autotek zinc primer is a rich coating that dries to a smooth, metallic, grey matt finish, designed to provide outstanding corrosion resistance on ferrous surfaces, and an excellent receptive basis for subsequent decorative and functional finishes.
Outstanding resistance to weathering, suitable for welding through.

HIGH5 PRIMER DARK GREY 450ML

[ Ref. HIGHDG/AL ]

Super high build primer with very smooth finish
Includes: 2 spray nozzles for greater flexibility of application (1 x adjustable fan nozzle for larger repair areas & 1 x build nozzle for small or local repairs)

Supplied in a convenient aerosol format: quick, clean and efficient
Easy to sand with smooth filling properties
Fast curing by infra-red, air drying or low baking

HIGH5 PRIMER GREY 450ML

[ Ref. HIGHG/AL ]

Super High Build Grey Colour primer with very smooth surface
In convenient Aerosol format: quick, clean and efficient
Economical
Easy to sand
Smooth filling properties
Fast curing by Infra-red, air drying or low baking

HIGH5 PRIMER WHITE 450ML

[ Ref. HIGHW/AL ]

Super High Build White Colour primer with very smooth surface
In convenient Aerosol format: quick, clean and efficient
Economical
Easy to sand
Smooth filling properties
Fast curing by Infra-red, air drying or low baking

MULTI PURPOSE PRIMER AEROSOL 450ML

[ Ref. MPPG/AL ]

Provides a smooth base for your chosen top coat. Ideal for use with ISOPON fillers, it sprays on easily to a perfectly smooth finish
Ideal for priming repaired areas
Excellent adhesion
Quick drying

POWERCAN ETCH PRIMER 500ML

[ Ref. PCEP/AL ]

Ideal for priming bare metal surfaces
Promotes adhesion of paint and prevents steel surfaces from rusting
Typically applied to rub-through areas prior to painting, on bare metal substrates and over bare seams before application of sealant

Can be applied to bare steel, aluminium, glavanised and zinc coated steels, fully cured paint, polyester bodyfillers and G.R.P.